Tie Rod ends are the joints attached at the end of the rods which make possible the flow of the movement under changing angles.

Drag Links are composed a bar connecting two tie rod ends. At the heavy duty trucks they provide the movement of the wheels to left or right.

Ball joint is a moving coupling which connects the whole suspension system. So depending on the condition of the road it allows to the wheels to move. Ball joints are used for the connection of the top and bottom swing arms with the drop arm. So it provides the conductionby turning around vertical axis of the wheel.

Torque rod is a connecting element to connect the axis with the chassis at the heavy duty trucks. The uncontrolled movements arosen from the conditions of the road are forwarded to the axis body. While a certain part of these uncontrolled movements and vibrations are reduced at the wheels , the main part is forwarded to the axis.

 

It has the same particularities like torque rod. The uncontrolled movements arosen from the conditions of the road are forwarded to the axis body. While a certain part of these uncontrolled movements and vibrations are reduced at the wheels , the main part is forwarded to the axis.

Axial joint is used for the connection of wheel gear with axle of the wheel. It forwards the movement that it gets from the steering to the tie rod end so that the Wheel turns.

In our hot forging facility, which has a capaticity of 15.000 kg per day , we are able to beat pieces up to 5 kg. Moreover we have equipment to produce through rub hot the articulated shafts with certain diameters. All the pieces produced in our hot forging facility are heated by inductionssystem und formed by using the frictionpress.